Antminer X9
Monero ASIC Miner
1000KH
HASHRATE
2.47W/KH
EFFICIENCY
2470W
POWER
£1025.23
EST. MONTHLY
5.7
Months
EST. ROI
Understand Quai Network mining, KawPoW blocks, SHA-256 and Scrypt workshares, pool checks and operating risks for UK miners.
TL;DR
Quai mining now has two distinct participation routes that should not be confused.
- KawPoW miners produce Quai blocks.
- SHA-256 and Scrypt hardware can participate through supported workshares under Project SOAP, subject to current pool and protocol rules.
- A workshare can earn a reward without being a Quai block, so pool reporting and payout mechanics need careful review.
- Verify current documentation, pool support and economics before redirecting any ASIC hashrate.
Quai Network mining in simple English
Quai Network mining: Project SOAP extends the workshare mechanism to more than one proof-of-work family. Current official documentation describes SHA256d, Scrypt and KawPoW workshares, each with a separate share-difficulty target.
Simple example
A node operator wants to understand Quai Network mining. Participation can add software, pool, network, payout and opportunity-cost considerations even when it does not require another ASIC.
Key terms in plain English
- ASIC:
- A computer built to do one specialised job. A mining ASIC is designed for a particular proof-of-work algorithm.
- Hashrate:
- The amount of mining work a machine attempts each second. More hashrate does not guarantee more profit.
- Wall power:
- The electricity measured at the socket or supply. It includes losses that a headline chip figure may leave out.
- Mining pool:
- A service that combines work from many miners and shares rewards using stated rules.
- Share:
- Proof sent by a miner to show completed work. A pool uses accepted shares when calculating rewards.
What is Quai Network?
Quai Network is a hierarchy of proof-of-work chains coordinated through merged mining. Official documentation records mainnet genesis on 4 February 2025. The architecture uses Prime, Region and Zone layers so that transaction processing can be distributed while mining work contributes to the wider hierarchy.
The network uses two native assets, QUAI and QI. Their design and reward rules can change through protocol upgrades. So miners should use the current documentation rather than relying on an older article or pool summary.
How Quai proof of work is organised
Quai’s documentation identifies KawPoW miners as the authors of Quai blocks. The chain also uses workshares. This are lower-difficulty work objects recorded by the protocol. Workshares help measure and reward contributed work without requiring every accepted submission to satisfy full block difficulty.
This distinction matters operationally. A dashboard may show accepted workshares even though the connected hardware is not producing Quai blocks directly. Review the pool’s accounting, fee and payout description so the revenue shown is understood correctly.
What workshares do
Project SOAP extends the workshare mechanism to more than one proof-of-work family. Current official documentation describes SHA256d, Scrypt and KawPoW workshares, each with a separate share-difficulty target. KawPoW block producers include eligible workshares in blocks, and those workshares can direct QUAI payments to the specified address.
The practical claim is reuse of mining work, not free energy. The parent-chain hardware is already consuming electricity. Participation can add software, pool, network, payout and opportunity-cost considerations even when it does not require another ASIC.
SHA-256 and Scrypt ASIC participation
Bitcoin-family SHA-256 ASICs and Litecoin or Dogecoin Scrypt ASICs may be able to submit supported workshares through a compatible pool. This depends on the current SOAP implementation, pool support and job format. Confirm whether firmware changes are required, how the pool reports shares and whether redirecting the machine changes parent-chain revenue.
Run a controlled worker before moving a fleet. Record accepted and rejected shares, pool-side hashrate, payout timing and any effect on the existing mining route. Do not assume a promotional comparison will match the site’s electricity price, latency or equipment.
Workshare participation should be evaluated as a routing decision. Identify which chain or marketplace currently receives the hashrate, what revenue is displaced and what extra reward is expected. If a pool claims that parent-chain work is retained, verify this in its technical and payout documentation. Compare settled payouts over a representative period rather than relying on a dashboard estimate.
Operators should also record protocol and counterparty dependencies. These include the Quai upgrade in use, pool implementation, wallet software, exchange route and any lock-up terms attached to rewards. A change in one dependency can affect payment timing or value even when the ASIC continues hashing normally.
Commercial and operational checks
- Confirm whether the miner will produce blocks or submit workshares.
- Verify supported algorithm, firmware and pool endpoint.
- Read the pool fee, payout threshold and reward method.
- Measure any change to reject rate and parent-chain earnings.
- Check wallet, exchange and custody arrangements for QUAI.
- Set an operating threshold based on net revenue, not headline yield.
Practical checks for Quai Network mining
Quai Network mining is most useful when it leads to a documented decision rather than a headline comparison.
- Confirm the active network, precise proof-of-work variant and current pool support rather than relying on a broad algorithm label.
- Match the exact ASIC model and firmware to the network, then verify wall power and accepted shares during a controlled test.
- Compare current revenue with electricity, pool fees, downtime and the alternative use of the same hardware before allocating hashrate.
- Recheck official project and manufacturer information because forks, pool endpoints, firmware and economics can change.
Frequently asked questions
What is the main point of Quai Network mining?
Quai Network mining: Project SOAP extends the workshare mechanism to more than one proof-of-work family.
For Quai Network mining, what should a beginner know about what is Quai Network?
Quai Network is a hierarchy of proof-of-work chains coordinated through merged mining.
For Quai Network mining, what should a beginner know about how Quai proof of work is organised?
Quai's documentation identifies KawPoW miners as the authors of Quai blocks. The chain also uses workshares.
For Quai Network mining, what should a beginner know about what workshares do?
Project SOAP extends the workshare mechanism to more than one proof-of-work family.
Conclusion: Quai Network mining
KawPoW miners produce Quai blocks. SHA-256 and Scrypt hardware can participate through supported workshares under Project SOAP, subject to current pool and protocol rules.
Join the ASIC Mining Discussion
Members can read and join the discussion
Log in to read comments from other miners. Create a free account if you would like to ask a question or share your experience.
Membership helps us protect the discussion from spam and keep answers useful.